10 Reasons That People Are Hateful To Double Glazing Lock Repairs Double Glazing Lock Repairs
Double Glazing Lock Repairs
A good quality lock on your windows and doors helps to prevent burglars from accessing your home. In general, they don't enjoy breaking glass or squeezing through open windows.
Certain double glazing owners however, have encountered issues with their window or door lock after installing. These issues can be fixed without the need for new double glazing.
Broken or Faulty Locks
A locksmith can repair your uPVC window or door lock if it is broken or faulty. They can fix the striker plates, hinges, and locks on your double glazing. They can also adjust the cylinder to correct any misalignment that may cause your handle to operate correctly.
The mechanism may be locked when the key is inserted into the lock, but it does not turn or become difficult for you to insert. The dirt or grease could be trapped in the mechanism. If this is the case, then it is possible to clean the lock and lubricate it. Use a dry lubricant such as graphite or teflon and not oil, as oil can attract dirt and cause it to stick to the inside mechanism. After lubricating the lock, you need to insert the key and try to turn it. The lubricant should make its way through the mechanism and the lock should be able turn without difficulty.
The loose screws inside the lock mechanism are a different cause of a faulty lock. They may loosen, fall out, or even break off completely, preventing the lock to work properly. The screws can be tightened with a screwdriver, but be careful not to over tighten them. This can damage the internal components.
A broken lock can be hazardous for you and your family. This is especially the case if you have children. They can easily unlock the door without knowing which gives them access to your home. If you are worried about this happening, then a licensed locksmith can offer rapid and effective service to re-secure your double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on uPVC doors and windows. We can also alter your uPVC or double glazing locking system to meet your specific requirements, meaning that in a lot of cases replacement windows and doors are not necessary.
Broken or Faulty Handles
As part of their overall security package most double-glazed windows feature a multipoint lock. This is an excellent option for those who are concerned about opportunistic thieves looking to gain access to your home. It is also a good idea to ask your installer about anti-lift blocks, these can be fitted on top of the locks already in place and help keep your window firmly locked in a closed position.
It's not uncommon for the handle locks to get damaged or even fail - they are the first part of your window to be pushed open by criminals who want to break in. Luckily, the good news is that this is among the easiest parts to repair.
Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette that is designed to resist forced entry. double glazing Spalding to security is typically offered as an optional extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional option on double-glazed window installations.
It is crucial to fix the handle as soon as you can if it's damaged. Handles that are damaged can prevent the window from closing properly and letting in a draft. It could also be a weakness that opportunistic thieves could take advantage of and put the belongings of your family and your own at risk.
To fix the malfunctioning mechanism, you first need to access the window frame and remove the damaged handle. The gearbox is then opened to determine the type of gearbox used to open the handle. This will allow a replacement that matches the profile and internal window frame mechanisms.
After the mechanism is replaced the handle can be put back together using the original screws. We recommend replacing them with more long screws as they will provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further corrosion. Once that's done the window will be fully operational again and at less than the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows do not shut properly, you could experience draughts, an affliction of your home's security, and an increased chance of damp or water damage. Broken or faulty window hinges are a typical issue and can be repaired easily.
If your uPVC windows don't open or shut, it is likely that the hinges need to be replaced or repaired. While many window companies require that you purchase a new window unit in order to resolve this simple issue, we're able to replace the hinges that are damaged and save you money.
Window hinges may break after repeated use, or they may be weakened through rust over time. In the event of a damaged hinge, it's important to take steps to prevent further damage by being careful not to make the window swing to open or close.
You can locate the appropriate parts for your hinge by identifying its type. Common types of window hinges are Maco, Mila, Roto and a variety of other brands. Get advice from a professional before purchasing parts that won't fit into your existing hardware. This can cause further damage.
A faulty hinge is a major issue for uPVC windows and doors. They can be an important source of noise and can also permit water to infiltrate your windows.
Verify that the pin barrels on both sides of the hinge are aligned. If it isn't, tap the headpin with a hammer in order to create an incline in the hinge barrel. This will help keep the pin in the right position. Then, ask a friend to hold the door while you take the hinges and hinge screws from both the doorjamb and the door. Replace the hinges using those of a matching size and attach the screws using glue. Finally, while the glue is drying, secure the hinges by using weights or clamps.
After you have repaired your hinges, you are able to install the door again. You could also reattach the handle. It is recommended to replace the screws with the same length of wood dowels as the original screw, so that they align with each the other.
Broken or faulty glass
uPVC Windows can be damaged over time, despite the fact that they are great at keeping cold out and conserving heat. This can be the case with broken or damaged glass and faulty locks. If neglected, this could be a costly problem. It can also affect the aesthetics of your home and lead to a loss in insulation. It is crucial to fix any damage as soon as it occurs.
If your glass has broken but isn't shattered it is possible to fix it yourself using the right tools and methods. Make sure that the area around the broken glass is clear of debris to ensure that pieces of glass do not cause injuries or cause a trip hazard. Then, you must remove any broken pieces and dispose of them appropriately. Then, place masking tape over the entire area to keep fragments from bouncing around and sticking to your skin when you move them. Making sure the glass pane is fitted prior to gluing it in place is an ideal option if you are dealing with windows with two panes. This will ensure you have enough space to complete your project.
Use a clean, dry cloth to clean the surface of the broken glass and the frame before applying the glue. Follow the directions for application and curing times that can differ from one product to the next. Depending on the direction of the crack, you may want to secure the glass in place during the curing process with lightweight clamps designed to hold fragile materials.
When the adhesive has completely cured, carefully reinstall the glass into the window frame, ensuring it's flush with the edge of the frame and that there aren't any gaps between the glass and the window sash. Be careful to avoid flexing the window when it's being installed, as this could weaken the seal and cause water infiltration and condensation.
Contact a professional glazier like O'Brien(r) for an appointment to replace your glass if the window is completely broken. If you leave broken glass unattended, it could pose a safety risk for children and pets It's therefore essential to act quickly.